EasyPSV® Glitter by Siser® is your everyday solution to blinging out everything in sight. This dazzling vinyl has a smooth but sparkly finish that can be applied to almost any hard surface – even curvy situations.
| EasyPSV® Glitter Cutter Settings |
|
Cricut: Blade: Standard Setting: Vinyl
|
|
Silhouette Cameo: Blade: Standard, 2 Material: Vinyl, Glossy Speed: 7 Force: 9
|
|
Brother ScanNCut: Blade: Standard, 3 Cut
Speed: 1 Cut Pressure: 1 |
|
Roland GX/GS-24: Blade: 45° Gram Force:80-110 Offset: .250 Speed: 50 cm/s
|
|
Graphtec: Blade: 45° Force: 9 Tool:CB09+0 Speed: 50 cm/s
|
|
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 55-60 Speed: 180 mm/s
*Blade Advancing Varies |
|
Titan 2 & 3: Blade: 45°/60° Gram Force: 50-55 Speed: 180 mm/s
*Blade Advancing Varies
|
| Application Instructions |
| • Place EasyPSV® with the liner side down and cut your design. (DO NOT reverse/mirror your design.) • Weed excess vinyl. • Remove the application tape’s paper liner and place tape on top of EasyPSV. • Burnish with a squeegee. • Lift the application tape and EasyPSV away from the paper liner. • Place the application tape on your desired object. • Burnish with a squeegee to fully adhere the design. • Gently peel away the application tape, leaving just your EasyPSV design on the object. |